CLASS II ONGOING Device recall · Reported 27 Dec 2023 · FDA Enforcement Report

Roche Cobas 8000 and Cobas PRO Interface Module recalled by Inpeco

Inpeco is recalling Roche Cobas 8000 and Cobas PRO Interface Module (CO8 IM)- IVD FlexLab Automation System, distributed nationwide in the US. The recall was initiated on 3 Nov 2023 and the FDA has classified it as Class II.

Check your package

Lot, batch or date codesFlexLab UDI-DI:07640172340004 Hardware versions: FLX-247-00 Firmware versions: COBASa_2.2.0, COBASa_2.3.0 Serial Number US: FLX.0208 Serial Numbers OUS: Serial Number FLX.0116 FLX.0165 FLX.0178 FLX.067 FLX.0127 FLX.0128 FLX.0150 FLX.0154 FLX.012 FLX.0121 FLX.0132 FLX.031 FLX.048 FLX.049
Quantity recalled1 unit US: 14 units OUS

Stop using the device if the notice says to, and contact the manufacturer or your healthcare provider for the correction or replacement.

Recall details

Recall number
Z-0560-2024
FDA event ID
93423
Recalling firm
Inpeco, Lugano, N/A
Classification
Class II
Status
Ongoing
Recall initiated
3 Nov 2023
FDA classified
15 Dec 2023
Reported
27 Dec 2023
Type
Voluntary: Firm initiated
Customers notified by
E-Mail
Reason category
Other Reasons
Device type
Medical Software

Timeline

3 Nov 2023Recall initiated by company
15 Dec 2023Classified by FDA+42 days
27 Dec 2023Published in enforcement report+12 days

Companies usually start a recall weeks before the FDA classifies and publishes it; the gap above is that lag.

Reason for recall

Firmware of the Interface Module with Roche Cobas 8000 and Cobas PRO (CO8 IM) may lead to a delayed sample tube processing.

Product as listed by the FDA

Roche Cobas 8000 and Cobas PRO Interface Module (CO8 IM)- IVD FlexLab Automation System -a modular system designed to automate Pre-Analytical and Post-Analytical processing, sample handling in order to automate sample processing in the Laboratory. Hardware versions: FLX-247-00 Firmware versions: COBASa_2.2.0, COBASa_2.3.0

Where it was distributed

Worldwide - US Nationwide distribution in the state of MA and the countries of AUSTRIA, BELGIUM, DENMARK, ITALY, NORWAY, SPAIN.

Nationwide Massachusetts

Questions about this recall

Why was it recalled?

Firmware of the Interface Module with Roche Cobas 8000 and Cobas PRO (CO8 IM) may lead to a delayed sample tube processing.

Which lots are affected?

FlexLab UDI-DI:07640172340004 Hardware versions: FLX-247-00 Firmware versions: COBASa_2.2.0, COBASa_2.3.0 Serial Number US: FLX.0208 Serial Numbers OUS: Serial Number FLX.0116 FLX.0165 FLX.0178 FLX.067 FLX.0127 FLX.0128 FLX.0150 FLX.0154 FLX.012 FLX.0121 FLX.0132 FLX.031 FLX.048 FLX.049

Where was it sold?

Worldwide - US Nationwide distribution in the state of MA and the countries of AUSTRIA, BELGIUM, DENMARK, ITALY, NORWAY, SPAIN.

What should I do if I have it?

Stop using the device if the notice says to, and contact the manufacturer or your healthcare provider for the correction or replacement.

What does Class II mean?

Class II means the product may cause temporary or medically reversible health problems, or the probability of serious harm is remote.

Read the official FDA notice · Source record retrieved 26 Sep 2026. The FDA describes openFDA data as unvalidated; the official notice takes precedence. This page reports the record and gives no medical advice.

More recalls from Inpeco

All 33
ReportedClassRecallCompanyReasonWhere
DeviceCLASS IIFlexLab (FLX) recalled by InpecoInpecoOtherMI
DeviceCLASS IIFlexLab (FLX) recalled by InpecoInpecoOtherMI
DeviceCLASS IIFlexLab (FLX) System recalled by InpecoInpecoOtherCA, NY
DeviceCLASS IIFlexLab X (FXX) System recalled by InpecoInpecoOtherCA, NY
DeviceCLASS IIFlexLab (FLX), Accelerator a3600 (ACP), Aptio Automation recalledInpecoDevice MalfunctionNationwide

Other Medical Software recalls

All 938